CONCRETE REPAIR PRODUCTS
OUR OTHER TYPES OF PRODUCTS
EPDM RUBBER GRANULES
SBR & CSBR RUBBER GRANULES
ULTRA CRETE
QC10-F
Fast setting concrete
Qty: 55lbs / 25kg
Complementary Information
Our QC10-F is a two-part polymer and fibre modified fast setting concrete specifically formulated for use in high temperatures and will outlast and outperform conventional concrete repair products and methods with a proven track record globally. It is a solution adapted to our weather conditions for concrete surface repairs, sidewalk slabs, curbs, pedestrian trails and manholes.
- Pot life: 5-10 minutes
- Set time: 10-20 minutes even at minus temperatures
- Open to traffic: 60 minutes
- Depth: 30-500mm
- Compressive strength after 90 minutes 20 Mpa
- SI final strength 65 Mpa
- Shrinkage compensated
Packaging: Bag of 55lbs / 25kg
Pallet: 56 bags /pallet
Documents INSTARMAC®
We at Multiflexx will provide our technical knowledge and assistance to the best of our ability. In our documents page, you may find a list of brochures, technical data specifications, material safety data sheets, certificates and test reports.
ULTRA CRETE ENVIROBED HA104®
Bedding mortar
Qty: 40lbs / 18kg
Complementary Information
Our Envirobed®HA104 is supplied as a two-component system which contains a blend of special cements, polymer graded aggregates and recycled glass. The combined components provide a high performance mortar, specifically formulated to outlast and outperform conventional concrete repair products and methods with a proven track record globally. It is a solution adapted to our weather conditions for concrete surface repairs, sidewalk slabs, curbs, pedestrian trails and manholes.
- Pot life: 15 minutes
- Set time: 30 minutes
- Depth: 10-50mm
- Compressive strength in 3 hours 52 Mpa
- Tensile strength in 3 hours 6 Mpa
- No hazardous waste disposal
- Can be used in wet conditions and cold temperatures
Packaging: Bag of 40lbs / 18kg
Pallet: 40 units /pallet
Documents INSTARMAC®
SCHÖNOX®
PL
Universal repairing mortar
Qty: 55lbs / 25kg
Complementary Information
Our SCHÖNOX® PL universal repairing mortar is a sturdy, resin-modified cement based levelling mortar and plaster. For filling holes and slots on walls and floors. Applicable in thicker layers as repairing-, smoothing and levelling compound. High physical properties. Low stress. For layer thickness from 1-10 mm without bulking material. Extendable for layer thickness up to 30 mm. For internal and external use. It is a repair product and solution with a proven track record adapted to our weather conditions for concrete surface repairs.
- Pot life: 15 minutes
- Set time: 45 minutes
- Depth: 1-30mm
- Application temperature: not below +5°C
Packaging: Bag of 55lbs / 25kg
Pallet: 42 bags /pallet
Documents INSTARMAC®
OUR OTHER TYPES OF PRODUCTS
EPDM RUBBER GRANULES
SBR & CSBR RUBBER GRANULES